Screw Washing Machine

The screw washing machine is a new generation of sand washing equipment produced by our company , it can also be called spiral stone washing machine, spiral sand washing machine plays an important role in promoting the use of helical blade cleaning soil.Compared with wheel sand washing machine, screw washing machine has higher degree of clarity. And it has better cleaning effect on the stone. Screw washing machine has a simple structure, smooth operation, clean sand washing, high yield and other notable features. It is widely used in construction sites, gravel pits, glass factory, power plant station, concrete preformed stone and electrician to other departments.

Production process of screw washing machine :

Material from the upper part of the machine fall into the high-speed rotation of the impeller. Due to the high-speed centrifugal force and another part of the umbrella-shaped materials generate high-speed impact on each other, the material will repeatedly collide with each other, friction and grinding, and directly discharge from the lower portion to form a closed loop several times to achieve the desired product particle size, which is controlled by the screening device. Screw washing machine is mainly applied to the impurity in the water, building materials, metallurgy and other industries, grading, washing and other operations.

SCREW washing machine (stone washing machine) safety rules:

1.Before the start of stone washing machine, you should firstly rotate the rotor by hand to check whether the machine has anomalies.

2.The use of units should be based on site-specific conditions, protective equipment should be installed on the V-belt in order to operate.

3.When stone washing machine is operating, which can not be repaired and clean-up work, non-boot overhaul.

4.Do not add the stones that exceed the required size.

5.The machine should rotate to the fixed direction, and reverse rotation is not allowed.

6.When the machine is running, if there is abnormal vibration or sound, you should immediately stop feeding the materials, when the inside materials are drained immediately, you should stop the motor to check troubleshooting, in order to continue to operate. The cavity materials must be removed before turning, start without load.

7.Stone washing machine workplaces should not be piled up debris, and there must be sufficient lighting equipment.