Concrete Crusher
Author: HXJQTime: 4/17/2013 5:40:57 PM
Concrete crusher is also known as concrete crushing machine , it is an common crusher equipment or crushing mill. It is suitable for metallurgy, mining, construction, chemical industry, water conservancy and railway authorities. It can also crush materials that compressive strength less than 250Mpa ores and rocks. It is featured by large crushing ratio, uniform product size, low power consumption and easy maintenance.
Features:
1.Deep crushing chamber and no dead zone, increase feed capacity and output.
2.Big crushing ratio, uniform particle size.
3.Gasketed discharge opening adjustment device, reliable and convenient adjustment range, increase the flexibility of the device.
4.Lubrication system is safe, reliable, easy to replace parts, equipment maintenance is simple.
5.Simple structure, reliable operation, low operating costs.
6.Discharge opening adjustment range, to meet the requirements of different users.
7.Low noise, less dust.
Working principle:
PE, PEX series
jaw crusher is motor-driven,by the motor pulley, V-belt and sheave drive the eccentric shaft, the movable jaw plate makes reciprocating movement at a predetermined trajectory, which will enter the crushing cavity composed of fixed jaw plate, movable jaw plate and side shield material to be broken, and through the lower part of the discharge opening,the finished products are discharged to get what you want.
Precautions:
The machine should be checked before using various parts of the fasteners, especially lubricating parts and all bolts, lubricating parts must be kept sufficient oil, loose bolts will be tightened, and then clean up the residue of the crushing cavity, and then boot production, in normal operation, note that the evenly feed materials. Movable jaw plate, static jaw, both sides of the shield are roof wearing parts, pay attention to maintenance.
